What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 28.06.2025 04:20
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
These devices are installed between the “hot” and “neutral” and protective ground.
This one hit behind the barn.
What is a sermon to talk about men?
so, what happens?
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
It seems Mohan does not understand the difference between a comment and an Answer.
I post the exact comment here.
the problem then depends on "how fast does the fuse operate?".
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
Here is a simplified AC power diagram.
He then asserts :
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
Can a Trump supporter explain what was wrong with what Bishop Budde said to Donald Trump?
This device then solves the entire problem.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
[old diagram got deleted by accident]
Harvard gastroenterologist shares 4 bloat-busting tricks that actually work - Times of India
The third is lightning and “how it gets conducted into a home.”
a photo is worth a thousand words.
This is where this question deviates from being a 'generic' question, and becomes more specific.
One is “what exactly is in a ‘surge protector’ ? ”
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
Edit 2024–10.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
A circuit breaker is similar, but is resettable.
Jessica Alba Reunites With Ex-Husband Cash Warren at Daughter Haven’s Graduation - instyle.com
So, the voltage could go up to 500 volts, and the fuse will not open up.
What does a fuse do?
[image of Common-mode choke]
Why is Taylor Swift re-recording her albums?
But it can get overloaded, and no longer works.
These are simplified answers to the original question, and does not change anything I wrote above.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
For this case there are devices called Metal oxide varistors (MOV).
but this device (an Inductor) … impedes the rapid changes in the current.
2024–10–16 [ OO OLAOYE OYEBODE ]
nine
Now when you have a certain ac resistance, then a current flows in a loop.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
(Dc diagram shown, AC is similar).
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
This is 'the assistant's answer'
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
A fuse is a non-resetable over current circuit protector.
It also is a device that limits the change in current flow.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
Because the load is inductive, the current lags the voltage.(by a bit).
2024–10–14 [Omar Gharbi Omar Gharbi ]
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
The MOV will conduct when the voltage exceeds 50% of line voltage.
2024–10–10[John johnson John Johnson ]
In schematic diagrams this is the symbol for a fuse:
At least they know the answer if they wanted it.
One
What is lightning?
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
but I think this circuit , shows a few more pieces.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
He then describes Rainy Season and Lightning.
Upvotes:
The other is “what does a “fuse” do?”
what exactly is a ‘surge’ protector?
Can the fuse protect the electronic devices from lightning instead of a surge protector.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
There are three different concepts here that are getting confused.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
At one ohm, the resistor has a maximum of 1 watt power.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
eight
There are two important concepts here.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
But… the neutral is now “floating” because of the 1 ohm resistance.
He then describes the function of a fuse.
The bolt then partially travels down the line to your home.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
Barnstars:
An AC voltage/ current source, and an ac inductive load.
First Sentence:
This is where the MOV conducts again, and dissipated the energy.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.